Specs:

TechLogix TL-SMG-4CP | Powered Share-Meâ?¢ Four Button Controller | SPECIAL ORDER


• Surface Control Interface: Two (2) membrane switches
  
• Under Table Connection One: (1) 4-pin removable terminal block
  
• Config Port: One (1) micro USB type B receptacle
  
• Surface Dimensions: 76mm (2.99 in) diameter; 2.8mm (0.11 in) tall
  
• Hole Insert Dimensions :56mm (2.20 in) diameter; 31.6 mm (1.24 in) deep
  
• Supported Baud Rates: 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200
  
• Warranty: 3 years
  

Features:

• Furniture-grade aluminum with black finish.
  
• Install in surfaces up to 38mm (1.5”) thick in minutes.
  
• Compatible with table hole diameters from 57mm – 70mm (2.25” – 2.75”).
  
• Compatible with TL-SM3C-HD/HDV switchers.
  

Overview:

The TL-SMG-4C is a table-mounted controller that is compatible with TechLogix Share-Me™ switchers (TL-SM3C-HD and TL-SM3C-HDV). It adds volume, mute, and display control to a Share-Me™ system.

Simply install the TL-SMG-4C into your conference table, then connect it to the Share-Me™ switcher using the included cable. The buttons will automatically control the display to which you are connected... no programming or configuration needed!

Compatible switchers use CEC protocol (by default), which is standard on most consumer-grade flat panel displays. Other displays like commercial LCD's or projectors can be controlled by IR or RS232, which is easily configured from the Share-Me™ switcher's web page.

Alternatively, the TL-SMG-4CP (with power supply) can be used as a standalone controller that can be connected directly to your display, giving you all the controls you need without expensive touchpanels or programming.

Review: