Specs:

Vanco/Pulse Audio PA-WPMIX | Wall Plate Mixing Microphone and Analog Audio Extender | Special Order


• Audio Inputs (TX): Balanced XLR, 3.5mm Stereo Jack
  
• Audio Outputs (RX): Balanced XLR, 3.5mm Stereo Jack
  
• Distance: Up to 984ft/300m over single Cat5e/6
  
• Input Impedance: 600 Ohms
  
• Mic Gain: +40dB
  
• Low Cut: -3dB @100Hz
  
• Current Draw : 70mA
  
• Power Supply : +12VDC
  
• Phantom Power : 12V
  
• Weight: TX: 0.65lbs (0.295kg); RX: 0.44lbs (0.2kg)
  
• Dimensions: TX: 5in. x 2.9in. x 1.6in.
  
  Package Contents:
  
• PA-WPMIX Extender set
  
• 12V Power Supply
  
• Mounting screws
  
• Product Manual
  

Features:

• Extends balanced XLR and 3.5mm stereo audio over a single Cat5e/6 up to 300m/984ft
  
• Dual-gang wall plate Transmitter can be installed into the wall for a clean installation
  
• Features Power over Cable (PoC), allowing the extender set to be powered off a single power supply, powered on the receiver end
  
• Mixing built in with an easy to use dial to mix between the XLR and stereo AUX inputs
  
• Mic input (XLR) and AUX input with balanced level control
  
• Supports two types of microphones, Dynamic and Condenser
  
• 12V Phantom power option
  
• Ability to cascade with connections for additional PA-TXMIX transmitters (sold separately) to add additional sources
  

Overview:

The PulseAudio PA-WPMIX Microphone Mixing Extender with dual-gang wall-plate transmitter extends and mixes balanced XLR and unbalanced analog audio signals up to 300m/984ft over a single Cat5e/6 cable. Mixing is done with an easy to use dial on the transmitting wall plate unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-WPMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-WPMIX includes two units: transmitting unit (PA-TXMIX-WP) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

Review: