ELAN EL-IPD-PRE-MSI| Multi Zone Preamp Audio Matrix
Digital Audio Inputs
3 Optical TOSLINK Inputs
3 Coaxial RCA Inputs
Stereo, PCM, 96kHz, 24-bit
Line Level Audio Outputs
8 Stereo / 16 Mono Analog RCA Inputs
Configurable to Left, Right, or Mono
Maximum input level: 2.0 VRMS
Input sensitivity: 0dbV (1.0 VRMS)
Input impedance 47k Ω to 49k Ω
Doorbell Audio Input
3.5mm Stereo Input
Max input level 2.0 VRMS
Input Sensitivity: 0dbV (1.0 VRMS)
Input Impedance: 47k Ω-49k Ω
Line Level Audio Outputs
6 Stereo / 12 Mono Analog RCA Pre-amp Outputs
Configurable to Left, Right, Mono, or Sub-woofer
Fixed or variable line level output
Fixed: 0dB fixed gain
Variable: -50 to +0dB at 0.5dB per step
Unbalanced Output impedance: 470 Ω
Lip Sync Delay
Individual Lip Sync Delay for Each Speaker and Preamp Zone
Delay Time: 0 in. 400ms
Adjustable: 10ms increments
Tone Control
Individual Tone Control for Each Speaker and Preamp Zone
Five-band equalizer
Loudness on/off
High/Low pass
Adjustable Crossover Points
Trigger Outputs
3.5mm Mono
Zone Trigger / System Trigger Outputs
Pinout: Tip = signal, Sleeve = ground
Output: +12Vdc, 100mA current limit
Network
1 RJ45 Jack 100/1000 Ethernet DHCP Enabled by Default
Power
AC 100-120 / 220-240 V~ 50/60Hz, 1000W
Temperature
Operating Temperature: +5° C in. +45° C (+41°F in. +113°F)
Operating Humidity: 0 in. 90% non-condensing
Storage Temperature: 0° C in. +60° C (32°F in. +140°F)
Dimensions
17 D X 17 W X 4 H in. / 431.8D X 431.8W X 101.6H mm (with feet)
17 D X 17 W X 3.5 in. / 431.8D X 431.8W X 88.9H mm (without feet)
Weight: 15.55 lbs / 7.05 Kg
Features:
6 Stereo or 12 Mono Pre-amp Zones
Adds ELAN Zone Control to Any Amplifier
With the Optional Network Audio Card, add Dante™ audio networking
3 Optical, 3 Co-ax, and 8 Stereo / 16 Mono Analog Inputs
DSP with 5-Band EQ for Each Zone
Lip Sync Correction
Overview:
The EL-IPD-PRE-MSI Multi Zone PREAMP Audio Matrix can be used in a stand-alone configuration with standard amplifiers or AVRs or with other amplifiers and pre-amps within the ELAN IP audio distribution family of products by adding the optional Dante™ Audio Networking Card.
In stand alone mode when paired with external amplifiers will support up to 22 input sources (6 digital, 16 mono / 8 stereo analog RCA and 1 stereo 3.5mm typically used as the doorbell input from an ELAN System Controller). Each RCA analog input can be configured as left, right or as mono. 12 line level outputs can be configured as 12 mono or 6 stereo output zones or as subwoofer out. Each can be configured as left, right, mono, or sub out.
Adding the optional Dante™ Networking card connects sources to other Dante™ enabled ELAN IP amplfiers using existing networks.
ELAN IP enabled audio distribution simplifies whole house audio distribution and enhances the intelligent home by delivering high quality audio over the existing network. Easily scaling from a single chassis solution to a decentralized multi-chassis / multi-source implementation, ELAN IP audio distribution meets the needs for projects of up to 64 individual zones.