Specs:

Integra DRX3.4 | 9.2 Channel 8K AVR

Amplifier Section

• Power Output Front L/R: 225 W/Ch at 6 Ohms, 1 kHz, 10%, 1 Channel Driven, 100 W/Ch at 8 Ohms, 20 Hzin.20 kHz, 0.08%, 2 Channels Driven, FTC
  
• Dynamic Power: 250 W (3 Ohms, Front) 220 W (4 Ohms, Front) 130 W (8 Ohms, Front)
  
• Input Sensitivity and Impedance: 200 mV rms/47 k-Ohms (Line/Unbalance) 3.5 mV rms/47 k-Ohms (Phono MM)
  
• THD+N (Total Harmonic Distortion + Noise) : 0.08% (20 Hzin.20 kHz, Half Power)
  
• Rated RCA Output Level and Impedance: 1 V rms/470 Ohms (Pre-out/Subwoofer Pre-out) 200 mV rms/470 k-Ohms (Zone B Line-out)
  
• Phono Overload: 70 mV (MM, 1 kHz, 0.5%)
  
• Frequency Response: 10 Hzin.100 kHz/+1 dB, -3 dB (Direct Mode)
  
• Tone Control: ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble)
  
• Signal-to-Noise Ratio: 106 dB (IHF-A, Line) 80 dB (IHF-A, Phono)
  
• Speaker Impedance: 4 Ohmsin.16 Ohms
  
  Tuner Section
  
• Tuning Frequency Range: FM 87.5 MHzin.107.9 MHz AM 530 kHzin.1,710 kHz
  
• FM/AM Preset Memory: 40 Stations
  
• General Power Supply: AC 120 V~, 60 Hz
  
• Power Consumption: 750 W
  
• Standby Power Consumption: 0.1 W
  
• Dimensions (W x H x D): 17 1/8 x 6 7/8 x 14 13/16 (435 x 174 x 376.5 mm)
• Weight: 24.3 lbs. (11.0 kg)
  
  Carton
  
• Dimensions (W x H x D): 22 1/16 x 12 x 18 3/8 (560 x 305 x 467 mm)
• Weight: 29.8 lbs. (13.5 kg)
  
  

Features:

• 5.2.4/7.2.2-ch Dolby Atmos® and DTS:X® playback
  
• Dolby Atmos Height Virtualization
  
• Dolby Surround® and DTS® Neural:X upmixing
  
• HDMI®*1 supports 8K/60p (4:4:4/12-bit*2, 4:2:2/12-bit*2, 4:2:0/10-bit*3), 8K/30p (4:4:4/12-bit*2, 4:4:4/10-bit*3, 4:2:2/12-bit*3, 4:2:0/12-bit), 4K/120p (4:4:4/12-bit*2, 4:4:4/10-bit*3, 4:2:2/12-bit*3, 4:2:0/12-bit) video passthrough, HDR10+, Dolby Vision™, HDR10, HLG, BT.2020, VRR (Variable Refresh Rate), DSC (Display Stream Compression), ALLM (Auto Low Latency Mode), QFT (Quick Frame Transport), QMS (Quick Media Switching), eARC (enhanced Audio Return Channel), DeepColor™, x.v.Color™, LipSync, and HDCP 2.3
  
• HDMI Main Out with eARC for encoded HQ audio, Sub/Zone 2 Out with OSD*4
  
• Bidirectional Bluetooth® wireless technology Version 4.2 + LE (A2DP v1.2, AVRCP v1.3; RX: SBC/AAC, TX: SBC/Qualcomm® aptX™/apt X HD)
  
• 9.2-ch multichannel pre-outs*5
  
• Dedicated DACs support synced/independent D/A audio distribution in Zone 2 and Zone 3 (including HDMI/SPDIF/NET*6) via Zone 2*7 and Zone 3 speaker outputs, Zone 2 pre-out*8 and Zone 3 pre-out*5
  
• Share any MAIN audio source to a wireless headphone dock via Zone B line-out*8
  
• Phono equalizer (MM) and SACD (Super Audio CD) playback via HDMI (2.8 MHz 2-ch/multichannel)
  
• Dirac Live® Room Correction supports multi-point acoustic calibration
  
• AccuReflex™ phase-matching solution for Dolby Atmos enabled speakers
  
• Original DSP-based Vocal Enhancer clarifies in-program vocals/dialog
  

Overview:

A Perfect Blend of Features, Ready to Integrate

Just right for your living room, media room, or bespoke home theater, the DRX-3.4 has the power to drive Dolby Atmos® and DTS: X® through 9 channels of onboard amplification. 8K HDR video passthrough provides the bandwidth needed for cutting-edge visuals and gaming. DIRAC Live room correction ensures your immersive surround experience is delivered with the highest fidelity. 9.2 channel pre-outs make the DRX-3.4 perfect for updating an existing separates system to HDMI 2.1, DIRAC Live, and Object-Based Surround.

Custom Integration Features

Review: