Specs:

RUSSOUND TVA2.1 Local Source Amp 2x30


• Amplified Channels: 2
  
• Frequency Response: 40Hz to 20KHz +/- 1dB, 20Hz -3dB, Sub Out: -3dB at 170Hz
  
• Input Impedance: 22K
  
• Line Output: Subwoofer
  
• Power Output: Continuous Stereo:
  
• 30 watts per channel at 8 ohms <1% THD+N
  
• Power Requirement(s): 27 VDC 4.0A (External D235PS Power Supply)
  
• Signal to Noise Ratio: >90dB 20Hz to 20KHz
  
• Total Harmonic Distortion: 1% (1KHz @ 1W)
  

Features:

• Class-D amplifier 2 x 30W RMS into 8ohm
  
• 24-bit/96kHz S-PDIF support
  
• S-PDIF, Optical and Analog Line Level inputs
  
• 4-pole Speaker Detachable Screw connector and line level Subwoofer output
  
• IR Learning for basic volume control. IR remote control support
  
• Small Footprint with mounting options for discreet installation
  
• External 24v Power Supply
  

Overview:

Its thin footprint means the TVA2.1 can be hidden behind the television or mounted in an in-wall panel behind a television for convenience. The built-in IR learning function eliminates the need for an external control system. This can dramatically reduce the cost of adding additional rooms of audio to a home and keeps the operation simple and intuitive for the homeowner by letting them use their current remote control device.

The TVA2.1 features three input options for flexibility. A traditional analog RCA line level input, and both Digital Coax and Optical S/PDIF. The TVA2.1 supports up to 24bit/96khz digital audio in a PCM stereo format.

Review: