Specs:
Lutron RRD-6ND-WH | RA2 Select Neutral LED Dimmer
- 600 W/600 VA Neutral Wire Dimmer in White
- Model Numbers Dimmer: RRD-6CL, RRD-6ND, RRD-10D, RRD-10ND, RRD-6NA, RRD-F6AN-DV,RRD-PRO
Switch: RRD-8ANS, RRD-8S-DV
Fan Speed Control: RRD-2ANF
Remote: RD-RD, RD-RS, RD-RD-277, RD-RS-277
- Power:
120 V~ 50/60 Hz: -6CL, -6ND, -10D, -10ND, -6NA, -2ANF, -8ANS, -RD, -RS, -PRO
120in.277 V~ 50/60 Hz: -F6AN-DV, -8S-DV
277 V~ 50/60 Hz: -RD-277, -RS-277
- Typical Power Consumption: Dimmer/Switch/Fan Speed Control: 0.6 W
Test conditions: load is off and nightlight mode is enabled.
Remote Dimmer/Switch: 0 W
Test conditions: load is off.
- Regulatory Approvals: UL, CSA (all except -6CL, -6NA and -PRO), cUL (-6CL, -6NA and -PRO only), NOM, FCC,
IC, COFETEL, ANATEL (all except -6NA, -6CL and Remotes)
- Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
- Communications Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. Remote dimmers/switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
- ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
- Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
- RTISS Equipped Circuitry compensates in real time for incoming line-voltage variations (neutral connection required). -PRO only.
- Power Failure Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
Mounting Requires a U.S. wallbox. 3½ in (89 mm) deep recommended, 2¼ in (57 mm) deep minimum.
- Wiring Use only remote dimmers (-RD/-RD-277) and remote switches (-RS/-RS-277) with dimmers / switches /fan speed controls. Up to 9 -RD/-RD-277 or -RS/-RS-277 may be used with controls.
Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf
Overview:
RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. Local fan speed controls are useful in locations where control of a single ceiling paddle fan is needed. RadioRA 2 Maestrodimmers incorporate advanced features such as fade-on/fade-off, delayed long fade-to-off, and rapid full-on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASS) for safe lamp replacement. RadioRA 2 Maestro local controls install in single pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron Designer (Claro or Satin Colors) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits.