Specs:

PANAMAX M8X2 Rack Mount Surge Protector

• Maximum Output Current: 15 amps
  
• Line Cord: 6 ft. captive 14 AWG with 3-conductor plug
  
• Operating Voltage: 120VAC 60Hz
  
• Spike Protection Mode: Line to neutral
  
• Energy Dissipation: 170 joules
  
• Peak Impulse Current: 12000 amps
  
• Maximum Continuous Operating Voltage: 130 VAC RMS
  
• Let Through Voltage (@ 125 amps 8/20uS waveform) 400 volts
  
• Noise Attenuation:
  
• Transverse mode: Greater than 23dB 200Khz to 10 Mhz
  
• Dimensions: 1.75 H x 19 W x 3.75 D
  
• Weight: 4.9 lbs.
  
• Safety Agency Listing: cTUVus
  
• Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
  

Features:

Maximum Output Current: 15 amps
Line Cord: 6 ft. captive 14 AWG with 3-conductor plug
Operating Voltage: 120VAC 60Hz
Spike Protection Mode: Line to neutral
Energy Dissipation: 170 joules
Peak Impulse Current: 12000 amps
Maximum Continuous Operating Voltage: 130 VAC RMS
Let Through Voltage (@ 125 amps 8/20uS waveform) 400 volts
Noise Attenuation:
Transverse mode: Greater than 23dB 200Khz to 10 Mhz
Dimensions: 1.75 H x 19 W x 3.75 D
Weight: 4.9 lbs.
Safety Agency Listing: cTUVus
Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

Overview:

M-8x2 Merit X Series M-8x2 Power Conditioner A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required. M-8x2 Specifications:

Review: