Specs:

PANAMAX MR4000 Power Management
AC Protection:

• 8 Protected & Filtered Power outlets
  
• Voltage Protection Rating (UL 1449 3rd Edition, 3,000A): 400V
  
• Under-voltage shutoff: 95V ±2V
  
• Thermal Fusing: Yes
  
• Single Pulse Energy Dissipation: 1350 Joules
  
• Response Time: < 1ns
  
• Protection Modes: L-N, L-G, N-G
  
• Protect or Disconnect Circuitry: Yes
  
• Peak Impulse Current: 52,000 Amps
  
• Over-voltage shutoff: 140V ±4V
  
• Maximum Current Rating: 15A (1800W)
  
• Line Voltage: 120V, 50/60Hz
  
• Initial Clamping Level: 200V Peak, 141VRMS
  
• EMI/RFI Noise Filtration: Panamax Level 2
  
• Automatic Voltage Monitoring Circuit: Yes
  
  
• LAN Protection
  
• Wires Protected: 8-Wires
  
• Jacks: RJ-45
  
• Clamping Level: 50V
  
  Universal Coax Protection
  
• Shielded: Yes
  
• Insertion Loss: < 0.5 dB
  
• HD 1080 i/p Ready: Yes
  
  
• Frequency Range: 0 MHz - 2.2 GHz
  
  Connections:
  
• Female "F", Gold Plated
  
  
• Clamping Level: 75V
  
• Bidirectional: Yes
  
  
• Weight: 6.5 lbs.
  
• Dimensions: 6â?쳌l x 17â?쳌w x 1.75â?쳌h, 2.19â?쳌h with feet
  

Features:

• 8 Protected & Filtered Power outlets
  
• 
  Exclusive Automatic Voltage Monitoring (AVM)
  
• 
  Protect or Disconnect™ Technology
  
• 
  Panamax Level 2 Noise Filtration
  
• 
  Antenna, Cable, or Satellite and LAN Signal Protection
  
• 
  8 ft. Power Cable with Low Profile Plug
  

Overview:

PROTECTS VALUABLE ELECTRONICS - even FROM LIGHTNING

Exclusive Protect or Disconnect™ circuitry completely disconnects AC power to connected equipment in the event of a catastrophic surge (such as lightning).

MAXIMIZES PICTURE AND SOUND QUALITY

Level 2 Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

MONITORS INCOMING LINE VOLTAGE AND DISCONNECTS IN DANGEROUS CONDITIONS

Panamax’s patented AVM circuitry continuously monitors the incoming power. In case of an undervoltage (brownout) or an overvoltage, a flashing red lightning bolt will be displayed and power to the connected equipment is automatically turned off. When voltage returns to a safe level, power to the equipment is automatically reconnected.

INDICATES FAULTY WIRING

Line fault indicator displays when electrical issues are present in wiring, and the unit disconnects power until the condition is corrected.

Review: